Konica Minolta bizhub C658 Service Manual page 822

bizhub C658/C558/C458/C368/C308/C258
(a) [Wireless Only] or [Wired + Wireless (Secondary Mode)]
• [Wireless Only] or [Wired + Wireless (Secondary Mode)] is selected in [Administrator Settings] -> [Network Settings] -> [Network I/F
Configuration]
Awake from ErP
Easy Setting (WPS)
Manual Setting
Connection Status
Device Setting
*1: It will be displayed when optional upgrade kit UK-212 is mounted.
(b) [Wired + Wireless (Primary Mode)]
• [Wired + Wireless (Primary Mode)] is selected in [Administrator Settings] -> [Network Settings] -> [Network I/F Configuration]
• When optional upgrade kit UK-212 is mounted.
Awake from ErP
AP Mode Setting
Wireless Channel
ANY connection
Select the method to return the machine from the ErP Auto Power Off mode.
• [OFF]: The machine is not returned from the ErP Auto Power Off mode.
• [Awake with Magic Packet]: The machine returns from the ErP Auto Power Off mode when receiving
a magic packet.
• [Awake with ARP + Unicast Communication]: The machine returns from the ErP Auto Power Off
mode when receiving a unicast communication packet.
[Awake with Magic Packet] is specified by default.
Configure a setting to automatically obtain connection information from an access point. The access
point must support the WPS function.
[Push Button Method]: Select [Push Button Method], and touch [Start Operation] to try a connection with
an access point. If you press the WPS setting button at the access point, settings such as SSID and
security required for a connection are configured automatically.
[PIN Method]: Select [PIN Method], and tap [Start Operation] to display the PIN code. If you enter the
displayed PIN code at the access point, settings such as SSID and security required for a connection are
configured automatically. This function requires a computer that contains Windows 7 or later as the
operating system.
Manually configure settings items such as SSID and the encryption scheme that are required for a
connection.
• [SSID]: Enter the SSID of the wireless LAN access point connected to the machine (using up to 32
characters).
• [40 to 20 MHz Auto Switch]: Select [ON] to try a high-speed communication with 40MHz. [OFF] is
specified by default. *1
• [Authentication/Encryption Algorithm]: Select the algorithm used for authentication or encryption.
• If [WEP] is selected, specify [Key Input Method] and [WEP Key]. To specify multiple WEP keys,
select the required WEP keys in [Use key settings].
• If an algorithm other than WEP is selected, specify [Key Input Method] and [Passphrase].
Allows you to check the access point connected to this machine, the radio field intensity of the access
point, and the current communication speed.
Allows you to check the MAC address of the wireless network adapter.
Select the method to return the machine from the ErP Auto Power Off mode.
• [OFF]: The machine is not returned from the ErP Auto Power Off mode.
• [Awake with Magic Packet]: The machine returns from the ErP Auto Power Off mode when receiving
a magic packet.
• [Awake with ARP + Unicast Communication]: The machine returns from the ErP Auto Power Off
mode when receiving a unicast communication packet.
[Awake with Magic Packet] is specified by default.
Set [Awake with ARP + Unicast Communication] for this function.
Manually configure settings to use this machine as a wireless LAN access point.
• [SSID]: Enter the SSID of this machine (using up to 32 bytes). When [Wired + Wireless (Primary
Mode)] is selected in Network I/F Configuration, the SSID of the access point is used. When [Wired
+ Wireless (Wi-Fi Direct)] is selected in Network I/F Configuration, the SSID for Wi-Fi Direct
connection is used. The SSID specified here is displayed on the Wi-Fi Direct (setting) screen of the
terminal compatible with Wi-Fi Direct. If you cannot connect to this machine by specifying the SSID
on the Wi-Fi Direct (setting) screen, specify [Virtual SSID] on the Wi-Fi (setting) screen to make a
connection.
• [40 to 20 MHz Auto Switch]: Select [ON] to try a high-speed communication with 40 MHz. [OFF] is
specified by default.
• [Authentication/Encryption Algorithm]: Select the algorithm used for authentication or encryption. [No
Authentication/Encryption] is specified by default.
• Specify [Key Input Method] and [WEP Key] when [WEP] is selected in [Authentication/ Encryption
Algorithm]. To specify multiple WEP keys, select the required WEP keys in [Use key settings]. When
[Wired + Wireless (Wi-Fi Direct)] is selected in Network I/F Configuration, [WEP] is not available.
• When an algorithm other than [WEP] or [No Authentication/Encryption] is selected in
[Authentication/Encryption Algorithm], specify [Key Input Method] and [Passphrase]. If necessary,
specify whether to automatically update the Encryption Key in [Passphrase Auto Update]. To
automatically update the Encryption Key, enter its update interval in [Update Interval].
Set a wireless channel to be used by the access point. Selecting [Auto] searches for a channel that is not
being used for other access points, and automatically assigns it to the access point. [Auto] is specified by
default.
Select whether to allow ANY connection. If [Restrict] is selected, the SSID cannot be detected
automatically as an access point in the wireless LAN adapter side. [Allow] is specified by default.
This option is displayed only when [Wired + Wireless (Primary Mode)] is selected in Network I/F
Configuration.
I ADJUSTMENT/SETTING > 2. List of utility mode
I-52