Konica Minolta bizhub C658 Service Manual page 831

bizhub C658/C558/C458/C368/C308/C258
(3) Setting item
• Mode 1
• Mode 2
NOTE
▪ If [Administrator Settings] -> [Security Settings] -> [Enhanced Security Mode] is set to "ON", selecting "Mode 1" in this setting
cancels enhanced security mode.
Only the number of times for trials up to the access lock can be changed.
▪ When [Mode 2] is selected, set the number of times where checks are made before access is locked.
(4) Procedure
• Touch [Release Time Settings] and set a period of time that elapses before access lock is released.
2.11.13 Security Settings - Enhanced Security Mode
(1) Use
• To set whether or not to enhance security.
• To use when enhancing the security function at user's option.
• The following settings are necessary for setting the security enhancement "ON".
Administrator Password
User Authentication
HDD encryption word
SSL Certificate
CE Password
CE Authentication
Image Controller Setting
Management Function Choice
(2) Default setting
• OFF
(3) Setting item
• ON
• OFF
NOTE
▪ Note that setting Enhanced Security Mode to "ON" disables the following functions.
▪ Print Data Capture (forcibly prohibited when Enhanced Security Mode is set to "ON")
▪ In CS Remote Care, the following operation is prohibited.
▪ Rewriting instructions of firmware, communication of the account track counter information, the setting renewal of the
machine.
▪ Firmware upgrading through Internet ISW (When the Enhanced Security Mode is set to ON, the setting of this function
cannot be changed from "OFF.")
▪ Setting the Enhanced Security Mode "ON" will change the setting values for the following functions.
▪ In addition, the indicator of "not be changed" below indicates that the settings cannot be changed while Enhanced Security
Mode is maintained "ON".
Function Name
Password Rules
Prohibited Functions
When Authentication
Error
Confidential Document
Access Method
Public User Access
User Name List
Print without
Authentication
Change it with the one which meets password rules.
Set to "ON (MFP)", "External Server Authentication", or "Main + External Server".
Set the encryption word with 20 characters.
Register self-certificate for SSL communication from the PSWC.
Change it with the one which meets password rules.
Set to [ON].
Set to [Controller 0].
Set to "Unset."
To apply the password rule to
enhance security.
To set the function for
prohibiting Authentication
operation in order to prevent
the unauthorized access.
To display the status of the
Authentication system on the
control panel for the
Confidential document access.
To permit use by a public user
having no user registration if
user authentication setting has
been made.
To display the list key for User
names on User Authentication
screen.
To allow or restrict printing
which user and account are not
specified.
I ADJUSTMENT/SETTING > 2. List of utility mode
Default Setting When Enhanced Security mode is set to [ON]
Disable Enable (not to be changed)
Mode 1 Mode 2 (not to be changed): Three times is set.
* The number of times can be changed to once,
twice, or three times. (It is twice, four or six times
for WebDAV server password.)
Mode 1 Mode 2 (not to be changed)
* In association with Prohibited Functions When
Authentication Error, the method is changed from
authentication using Secure Document ID and
password (Mode 1) to that using the password with
the Secure Document first narrowed down by
Secure Document ID (Mode 2).
Restrict Restrict (not to be changed)
OFF OFF (not to be changed)
Restrict Restrict (not to be changed)
I-61