Konica Minolta bizhub C658 Service Manual page 319

bizhub C658/C558/C458/C368/C308/C258
G.5.2.2 Scanner right cover
9. Remove the original glass.
G.5.2.12 Original glass
[1]
[1]
[2]
[1]
[2]
[2]
[1]
15. To reinstall, reverse the order of removal.
NOTE
▪ When installing the LED exposure unit, be careful not to pinch the flat cable with the screws.
▪ When replacing the LED exposure unit with a brand-new one, peel the protective film from the unit after attaching it.
▪ When replacing the LED exposure unit, order a replacement seal (Parts number: 4581 1625 ##).
5.3.2 Paper feed unit
1. Slide out the tray 1 and tray 2.
10. Move the LED exposure unit assy to screw access point [1].
11. Peel off seal [1].
12. Remove two screws [2] of the LED exposure unit assy [1].
13. Disconnect the flat cable [1], and remove the LED exposure unit assy [2].
[1]
14. Remove two screws [1], and remove the LED exposure unit [2].
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
G-19