Konica Minolta bizhub C658 Service Manual page 556

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
20. To reinstall, reverse the order of removal.
8.8 Disassembly/reassembly procedure (PC-415)
8.8.1 Right door (PC-415)
1. Open the right door.
[1]
[2]
3. To reinstall, reverse the order of removal.
8.8.2 Rear right cover (PC-415)
[1]
2. To reinstall, reverse the order of removal.
8.8.3 Rear cover (PC-415)
[2] [1]
[1]
2. To reinstall, reverse the order of removal.
8.8.4 Paper feed tray (PC-415)
1. Slide out the paper feed tray, and remove the paper.
[2]
17. Turn the tray back to the original status.
18. Remove two C-rings [1] and two wire pulleys [2].
19. Remove the wire from the wire pulley [2].
NOTE
▪ Take care not to lose the pin.
▪ When reinstalling the wire pulley [2], check that the direction of the
wire coming from both wire pulleys are the same.
2. Remove the screw [1], and remove the right door [2].
1. Remove two screws [1], and remove the rear right cover [2].
1. Remove five screws [1], and remove the rear cover [2].
G-256
G DISASSEMBLY/REASSEMBLY > 8. Option