bizhub C658/C558/C458/C368/C308/C258
5.16.1 HDD
• Setting change is unnecessary. (Select [Installed] at any time.)
NOTE
▪ For putting the following order [System 1] -> [initialization] into practice, the set becomes [Not Installed], causing an error.
Required to set [Installed] again.
5.16.2 Image Controller Setting
(1) Image Controller Setting
(a) Use
• To set the type of the controller.
• When setting up the controller.
(b) Procedure
• Select the controller to be used.
(c) Default setting
• Controller 0
(d) Functions
• Controller 0: The standard controller is used.
• Controller 1: Optional image controller IC-416 is used.
• Others: undefined.
NOTE
▪ When [Administrator Settings] -> [Security Settings] ->
"Controller 0". When [Enhanced Security Mode] is set to "ON", this setting cannot be changed.
▪ After changing setting, make sure to turn off the main power switch and turn it on again more than 10 seconds after.
I ADJUSTMENT/SETTING > 5. SERVICE MODE
[Enhanced Security
Mode] is "ON", this setting should be set to
I-144