Konica Minolta bizhub C658 Service Manual page 354

bizhub C658/C558/C458/C368/C308/C258
[3] [1]
[2]
(2) Reinstall procedure
1. Remove the scanner right cover.
G.5.2.2 Scanner right cover
2. Remove the upper right cover.
G.5.2.19 Upper right cover
[2]
[1]
[1]
5. Attach it in reversed procedures of removal.
5.5.5 ADU transport motor (M5)
1. Open the right door.
[1]
[2]
[1] [2]
[3]
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
9. Remove two screws [1]. Disconnect the connector [2], and remove the
switchback motor [3].
3. Remove the screw [1], and remove the cover [2].
4. Attach the drive belt [1] to the gear of the switchback motor.
2. Remove two screws [1], and remove the gear cover [2].
3. Disconnect the connector [1].
4. Remove the screw [2], and remove the ground terminal [3].
G-54