Konica Minolta bizhub C658 Service Manual page 581

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
6. To reinstall, reverse the order of removal.
8.10.7 LU drive board (LUDB) (LU-302)
1. Remove the right cover.
G.8.10.2 Right cover (LU-302)
2. Remove the rear cover.
G.8.10.4 Rear cover (LU-302)
[2] [1]
[3] [1]
8.10.8 LU lift-up motor (M1) (LU-302)
1. Remove the right cover.
G.8.10.2 Right cover (LU-302)
2. Remove the rear cover.
G.8.10.4 Rear cover (LU-302)
[1]
[3]
4. To reinstall, reverse the order of removal.
8.10.9 Dehumidification heater (DH) (LU-302)
1. Remove the right cover.
G.8.10.2 Right cover (LU-302)
[1]
[2]
5. Remove two screws [1] and remove the mounting plate [2].
3. Disconnect five connectors [1], remove four screws [2] and remove the LU
[2]
3. Disconnect the connector [1], remove two screws [2] and remove the LU lift-up
[2]
2. Remove the harness from the connector [1] and three wire saddles [2].
drive board [3].
motor [3].
G-281
G DISASSEMBLY/REASSEMBLY > 8. Option