Konica Minolta bizhub C658 Service Manual page 690

bizhub C658/C558/C458/C368/C308/C258
8.20 Disassembly/reassembly procedure (FS-537SD saddle section)
8.20.1 Front cover (FS-537SD saddle section)
[2] [3]
[1] [3] [4]
3. To reinstall, reverse the order of removal.
8.20.2 Saddle unit (FS-537SD saddle section)
• Be careful not to catch your finger in the edge of the rail
when mounting the saddle unit on the right rail for the
saddle unit installation.
• Be careful not to jam your finger in the connecting section
of the pantograph.
1. Remove the finisher from the main body.
G.8.19.12 Finisher (FS-537/FS-537SD)
2. Remove the front door of the finisher.
G.8.19.5 Front door (FS-537/FS-537SD)
3. Remove the finisher front lower cover.
1. Remove the screw [1], and remove the jam clearing dial [2].
2. Remove four screws [3], and remove the front cover [4].
CAUTION
CAUTION
G-390
G DISASSEMBLY/REASSEMBLY > 8. Option