Konica Minolta bizhub C658 Service Manual page 827

bizhub C658/C558/C458/C368/C308/C258
(e) <Synchronize WebDAV Client Setting>
• Select whether to use the proxy server for WebDAV transmission as a proxy server for the server where the dedicated software was
installed.
• To use a different proxy server, select [Individual Settings] and enter the proxy server information.
(f) <Launch Remote Panel from vCare>
• To set whether or not to allow the remote panel to be started from the remote diagnosis system.
2.11.9 Machine Update Settings - Internet ISW Settings
• This is displayed when [Function Setting] is set to [ON] in [Service Mode] -> [Machine Update Setting] -> [Internet ISW] -> [Internet ISW
Set].
(1) Update Firmware at Specified Time
• This is displayed when [Open Mode Settings] is set to [Set] in [Service Mode] -> [Machine Update Setting] -> [Internet ISW] -> [Internet
ISW Set].
(a) Use
• To update the downloaded firmware at the specified time.
(b) Default setting
• No
(c) Setting item
• Yes
• No
• If [Yes] is selected, set the time to update the firmware.
(2) FTP Server Settings
• This is displayed when [FTP data acquisition setting] is set to [ON] in [Service Mode] -> [Machine Update Setting] -> [Internet ISW] ->
[FTP Setting].
(a) Use
• To set whether to connect via a proxy server to access the FTP server.
• To configure the settings related to the server for connection via a proxy server.
(b) Default setting
• OFF
(c) Setting item
• ON
• OFF
(d) Procedure
• If [ON] is selected, configure the following settings.
1. Touch [Host Address] in [Proxy Server Address] to set the host address of the proxy server.
2. Set the port number used to access the proxy server in [Proxy Server Port Number].
(3) Firmware Update Parameters
• This is displayed when [Open Mode Settings] is set to [Set] in [Service Mode] -> [Machine Update Setting] -> [Internet ISW] -> [Internet
ISW Set].
(a) Use
• To download and update the firmware.
• When you wish to update the firmware at the specified time, after downloading it in the way described here, you can specify the time in
[Update Firmware at Specified Time].
(b) Procedure
1. Touch [Download] in [Administrator Settings] -> [Network Settings] -> [Machine Update Settings] -> [Internet ISW Settings] ->
[Firmware Update Parameters].
2. Select [Yes] in the confirmation screen and touch [OK].
3. The firmware download starts.
4. The message to show the status will be displayed on the screen while connecting and transferring data.
5. Select [Upgrade] or [Delete].
• Touching [Upgrade] starts updating using the downloaded firmware data. Select [Yes] in the confirmation screen and touch [OK].
• Touching [Delete] will delete the downloaded firmware data. Select [Yes] in the confirmation screen and touch [OK].
6. When the firmware is normally upgraded, the main body will automatically be restarted to complete the Internet ISW.
NOTE
▪ To download the firmware, in addition to the necessary proxy settings configured in [FTP Server Settings], you need to
configure appropriate settings in [Service Mode] -> [Machine Update Setting] ->[Internet ISW] -> [HTTP Setting], [FTP Setting],
and [Forwarding Access Setting].
I ADJUSTMENT/SETTING > 2. List of utility mode
I-57