Konica Minolta bizhub C658 Service Manual page 412

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1]
[2] [1] [4]
[3]
15. To reinstall, reverse the order of removal.
6.3.13 IH coil (IHC) (bizhub C658/C558)
1. Remove the fusing unit.
F.8.10.1 Replacing the fusing unit (bizhub C658/C558)
2. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
3. Remove the toner filter.
F.8.1.1 Replacing the toner filter
4. Remove the lower rear cover.
G.6.2.21 Lower rear cover
5. Remove the scanner left cover.
G.6.2.4 Scanner left cover
6. Remove the scanner rear cover.
G.6.2.1 Scanner rear cover
7. Remove the DF cable cover.
G.6.2.22 DF cable cover
8. Remove the upper rear cover.
G.6.2.25 Upper rear cover
9. Remove the paper cooling fan assy.
G.6.7.7 Paper cooling fan (FM8)
10. Remove the left cover.
G.6.2.16 Left cover
11. Remove the exit cover.
G.6.2.17 Exit cover
12. Remove the output rear cover.
G.6.2.18 Output rear cover
[2]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
11. Remove the screw [1], and remove the stopper [2].
12. Remove the E-ring [1], and remove the gear [2].
13. Remove the screw [1], and remove the plate spring [2].
14. Remove three screws [3], and remove the transport unit [4].
NOTE
▪ When removing the transport unit [4], be careful not to damage or
deform the guide sheet of the tray 1 paper feed unit.
G-112