Konica Minolta bizhub C658 Service Manual page 1214

bizhub C658/C558/C458/C368/C308/C258
System Settings Expert Adjustment
Standard Size
Setting
(2) Default setting
• Prohibit
(3) Setting item
• Level 1
• Level 2
• Prohibit
7.3.4 CE Authentication
• If [Administrator Settings] -> [Security Settings] -> [Security Details] -> [Password Rules] is "Enable", "OFF" in the setting item is not
displayed.
• It will not be displayed when [Administrator Settings] -> [Network Settings] -> [Remote Panel Settings] -> [Client Settings] is set to "ON."
(1) Use
• To determine whether or not to authenticate CE password as entering Service Mode.
NOTE
▪ For setting the [Password Rules] to "ON", set the CE Authentication to ''ON''.
Change the initial CE password beforehand.
▪ Before setting the [Remote Panel Settings] to "ON", set the CE Authentication to ''ON''.
(2) Default setting
• ON
(3) Setting item
• ON
• OFF
7.3.5 Life Stop Setting
(1) Life stop
(a) Use
• To select whether or not to stop a print cycle when the drum unit, developing unit, transfer belt, and fusing unit reach its service life.
NOTE
▪ The settings of software Dip switch No.227 (bit7) and switch No. 230 (bit3) have priority.
(b) Default setting
• Off (For Japan, North America and Europe)
• Enable (For others)
(c) Setting item
• Enable
• Off
(2) Life warning display
(a) Use
• Select whether to display or not display the pre-near life warning, near life warning, life warning, life stop warning, and L-call warning.
Warning statuses are not displayed for units in which this setting is set to [Do not display] even if each warning status is enabled.
• Applicable units: drum unit, developing unit, transfer belt, and fusing unit
NOTE
▪ The settings of software Dip switch No.227 (bit7) and switch No. 230 (bit3) have priority.
Administrator settings function
Printer Adjustment Erase Leading Edge
Paper Feed Direction Adj.
Scanner Area Scanner Adjustment: Leading Edge
Scanner Adjustment: Centering
Horizontal Adjustment
Vertical Adjustment
ADF Adjustment Centering
Original Stop Position
Centering Auto Adjustment
Auto Adj. of Stop Position
User Paper Settings
Original Glass Original Size Detect
Foolscap Size Setting
I-444
I ADJUSTMENT/SETTING > 7. ENHANCED SECURITY
Level 1 Level 2
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○
-
○