Konica Minolta bizhub C658 Service Manual page 462

bizhub C658/C558/C458/C368/C308/C258
[2] [1]
[3]
[2] [1]
[1]
[1]
10. To reinstall, reverse the order of removal.
6.7.5 Toner cartridge cooling fan (FM4) (bizhub C458)
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
2. Remove the toner filter.
F.8.1.1 Replacing the toner filter
3. Remove the lower rear cover.
G.6.2.21 Lower rear cover
4. Remove the scanner left cover.
G.6.2.4 Scanner left cover
5. Remove the scanner rear cover.
G.6.2.1 Scanner rear cover
6. Remove the DF cable cover.
G.6.2.22 DF cable cover
7. Remove the upper rear cover.
G.6.2.25 Upper rear cover
8. Remove the paper cooling fan assy.
G.6.7.7 Paper cooling fan (FM8)
[1] [3]
[2]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
6. Remove the harness from three wire saddles [1].
7. Disconnect the connector [2], and remove the toner cartridge cooling fan assy
[3].
8. Remove three tabs [1], and remove the cover [2].
9. Remove the toner cartridge cooling fan [1].
9. Disconnect the connector [1].
10. Remove the screw [2], and remove the toner cartridge cooling fan assy [3].
G-162