Konica Minolta bizhub C658 Service Manual page 930

bizhub C658/C558/C458/C368/C308/C258
File extension
FileName
Image size
Color
NOTE
▪ When making the logo data, use the exclusive image making tool.
▪ If a USB memory is not connected or a nonconforming USB memory is connected, "USB NG" is displayed and logo data
cannot be registered.
▪ If the file name of logo data does not conform to the above specifications, "File NG" message is displayed and logo data
cannot be registered.
▪ To install logo data as a zip format file, compress the bin file of the same name (image data) and the Version.txt file (version
information) in one zip file.
▪ Version information will be displayed as the version of BootUp Screen, when Version.txt is installed with the version
information described in the Version.txt file and compressed with image data in one zip file. Usable character type is limited
to ASCII (7-bit ASCII). Text strings of up to 21 characters can be used.
(b) Procedure
1. Save logo data that conforms to the above specifications in the root directory of a USB memory device.
NOTE
▪ Be sure to save data in the root directory as the machine cannot detect data saved in other directories.
2. Connect the USB memory device to the machine USB port.
3. Touch [System 2] -> [
4. Touch [Set].
5. Check result "OK" is displayed and touch [END].
NOTE
▪ If logo data is already registered, new logo data overwrites the existing logo data.
▪ The color of logo data may look different between the machine control panel and some PC screens. After registering
logo data, restart the machine and check the color of the logo data on the BootUp screen.
* To delete registered data, touch [Delete] and check result "OK" is displayed.
(2) Machine Image
NOTE
In the following conditions, import of machine image data is prohibited.
• [Administrator Settings] -> [Security Settings] ->
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] -> [Detail Setting] -> [External
Memory(Service)] is set to [Restrict].
• [Administrator Settings] -> [Security Settings] ->
(a) Use
• To customize the exterior view of the machine displayed on the control panel.
• Use this function to change the exterior view of the machine displayed on the control panel to the exterior view of the customer
business office according to the user's need.
• The exterior view data can be registered to the eMMC board from USB memory.
• Check the version of the installed exterior view data. (When the USB memory is not connected)
(b) Procedure
1. Save the exterior view data in the root directory of the USB memory.
NOTE
▪ Be careful that the MFP is unable to recognize data saved in any directories other than the root directory.
2. Connect the USB memory to the USB port of the machine.
3. Touch [System 2] -> [
4. Touch [Set].
5. Check result "OK" is displayed.
6. Turn OFF and ON the main power switch.
NOTE
▪ Any exterior view data that has previously been registered will be overwritten by subsequent new data as it is registered.
▪ To delete registered data, touch [Delete] and make sure that "OK" appears.
(3) Custom Auth. Setting
NOTE
Only when one of the following conditions is met, the authentication customize data can be imported.
• A USB memory is inserted in the USB port.
• [Administrator Settings] -> [Security Settings] ->
(Service)] -> [Storage data backup] is set to [Allow].
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] -> [Detail Setting] -> [External Memory
(Service)] -> [FW Update] is set to [Allow].
• [Administrator Settings] -> [Security Settings] ->
(a) Use
• To install the authentication customize data used to customize the authentication process.
".bin" or ".zip"
BootUpScreen*.bin or BootUpScreen*.zip (* represents user-defined text)
bizhub C368/C308/C258
bizhub C658/C558/C458
256 colors (Palette that the machine specifies is used.)
] -> [Import Config. Data] -> [BootUp Screen].
[USB Connection Permission
[Enhanced Security
] -> [Import Config. Data] -> [Machine Image].
[USB Connection Permission
[Enhanced Security
I ADJUSTMENT/SETTING > 5. SERVICE MODE
800 x 480 dots
1024 x 600 dots
settings] is set to [Restrict].
Mode] is set to [ON].
settings] -> [Detail Setting] -> [External Memory
Mode] is set to [OFF].
I-160