Konica Minolta bizhub C658 Service Manual page 463

bizhub C658/C558/C458/C368/C308/C258
[1] [2]
13. To reinstall, reverse the order of removal.
6.7.6 IH coil cooling fan (FM7)
1. Remove the upper front door.
G.6.2.12 Upper front door
2. Remove the lower front door.
G.6.2.13 Lower front door
3. Remove the waste toner box.
F.8.7.1 Replacing the waste toner box
4. Remove the front lower cover.
G.6.2.14 Front lower cover
5. Remove the front cover.
G.6.2.15 Front cover
6. Remove the toner cartridge.
F.8.4.1 Replacing the toner cartridge
7. Remove the drum unit.
F.8.2.1 Replacing the drum unit
8. Remove the developing unit.
F.8.3.1 Replacing the developing unit
9. Remove the exit cover.
G.6.2.17 Exit cover
10. Remove the sub hopper drive unit.
G.6.3.4 Sub hopper unit
[2]
[3] [1]
[1]
[2]
[1] [3]
16. To reinstall, reverse the order of removal.
[2]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
11. Remove the harness from the harness guide [1].
12. Remove the filter [2], and remove the toner cartridge cooling fan [2].
11. Remove two screws [1], and remove the IH coil cooling fan [2].
12. Remove the harness from two wire saddles [3].
13. Remove two screws [1], and remove the duct [2].
14. Remove the harness from the edge cover [1].
15. Disconnect the connector [2], and remove the IH coil cooling fan [3].
G-163