Konica Minolta bizhub C658 Service Manual page 686

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
7. To reinstall, reverse the order of removal.
8.19.28 FNS discharge motor (M17) (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
2. Remove the route change gate motor assy.
G.8.19.18 Route change gate motor (M4) (FS-537/FS-537SD)
[3] [2]
[1] [2]
[2]
[1]
6. Reinstall the above parts following the removal steps in reverse.
8.19.29 Sub tray discharge motor (M18) (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
[2] [1]
6. Remove two screws [1], and remove the SD discharge motor [2].
3. Disconnect the connector [1].
4. Remove three screws [2], and remove the FNS discharge motor assy [3].
5. Remove two screws [1], and remove the FNS discharge motor [2].
2. Remove the screw [1] and loosen the harness guide [2].
G-386
G DISASSEMBLY/REASSEMBLY > 8. Option