Konica Minolta bizhub C658 Service Manual page 518

bizhub C658/C558/C458/C368/C308/C258
[1]
[1] [1]
[2]
[1]
[2]
[1] [2]
[1]
[2]
[2]
4. Remove 11 screws [1], and remove the lower rear cover [2] from the back of
the main body.
5. Remove the cable from the wire saddle [1], and disconnect the connector [2].
6. Remove the cable tie [1], and disconnect three connectors [2].
7. Open the dual scan document feeder [1].
NOTE
▪ If the reverse automatic document feeder is set to be lifted up at
angles up to 60 degrees due to the set position of the stopper for the
hinge, change the set position to the lower side so that the reverse
automatic document feeder can be opened completely.
8. Remove two screws [2].
9. Remove the dual scan document feeder [1].
G-218
G DISASSEMBLY/REASSEMBLY > 8. Option