Konica Minolta bizhub C658 Service Manual page 920

bizhub C658/C558/C458/C368/C308/C258
Switch Function
No.
When running a copy cycle with
originals placed on the original
glass, and [Auto] is displayed in
"Group/Sort" of the finishing
function, [Auto] will be set as
default. ("Sort" and "Offset" will be
executed when [Auto] is selected.)
Switch-over settings of Duplex
printing and Billing permission
Setting for allowing/prohibiting
billing on exited paper when a
paper size error occurred at the
time of duplex printing
146 Setting for enabling use of Non-
Image Area Erase, Centering, and
Original Size when the book
original is used in the fax/scanner
mode
151 Setting for displaying/hiding the
Near Empty Display Time
152 The E-mail body print settings of E-
Mail RX Print
155 Validation/invalidation of the debug
setting of the log.
157 Change the upper limit of the time
for switching to power save mode.
163 Setting for the auto execution of
Self-diag.(Full)
192 Set whether to enable the Android
and iOS function
203 Setting to automatically change
log-in authorization to a second
user when the second user
attempts card authentication after a
first user has been authenticated
through card authentication.
206 Setting whether to enable
Coverage Counter
227 Setting for the display of
consumable level and warning.
(Operatino panel, PSWC, Fiery)
Setting value
Bit HEX
Assignment Assignment
00000000 00 Enable
00001000 08 Disable
00000000 00 Allow (billing on one side
of the paper)
00010000 10 Prohibit
00000000 00 Prohibits use of Non-
Image Area Erase,
Centering, and Original
Size.
00000100 04 Enables use of Non-
Image Area Erase,
Centering, and Original
Size.
00000000 00 Hide
00000010 02 Display
00000000 00 Disables the E-mail body
print settings
00000001 01 Allows the E-mail body
print settings.
00000000 00 Debug setting is disabled. 00000000 / 00
00000001 01 Debug setting is enabled.
00000000 00 Do not change the upper
limit.
00000010 02 Change the upper limit to
240 min.
00000000 00 Disable
00000010 02 Enable
The Self-diag. (Full) will
be executed automatically
only when the rank B/C
trouble codes are
detected.
00000000 00 Disable
00000001 01 Enable
00000000 00 Log-in authorized.
00000100 04 Log-in not authorized.
00000000 00 Disable
00000001 01 Enable
00000000 00 Display
10000000 80 Not display
I-150
I ADJUSTMENT/SETTING > 5. SERVICE MODE
Default value
(Bit/HEX)
Details
00000000 / 00 -
00010000 / 00 -
00000000 / 00 -
00000000 / 00
00000000 / 00
00000000 / 00 -
00000000 / 00 -
00000001 / 01 -
00000000 / 00 -
00000000 / 00
(Japan/North
America/
Europe):
10000000 / 80
Reference
• Warning
Display - Near
Empty Display
Time
• This function
supports the
following
languages.
English,
French, Italian,
Germany,
Spanish
• Debug Setting/
I.9.2 Starting/
Exiting
• Debug Setting/
I.9.4.1 Basic
mode
• Coverage
Counter Setting
• Print Counter
Clear
• Coverage
Counter Detail
-