Konica Minolta bizhub C658 Service Manual page 861

bizhub C658/C558/C458/C368/C308/C258
2. Press the key for the item that you would like to change the setting for. Setting screens will appear for each item.
Ex.: Install Date
3. Press the key for the setting you would like to change. You can also input the numerical value using the 10-key pad. (the [+]/[-] keys can
also be used for settings. Follow the directions on the screen to input numerical values.)
NOTE
▪ For more details, see the description pages for each setting item.
4. Touch [END]. This closes the setting screen and returns to the Service Mode screen. (If deep within the hierarchy of the setting screen, it
may be necessary to touch [END] several times)
5. Touch [Exit]. This will close the Service Mode screen and exit the Service Mode.
6. Turn OFF the main power switch. After waiting 10 seconds, turn ON the main power switch again. Turning the main power switch OFF and
then ON again makes the changes to the Service Mode setting take effect.
NOTE
▪ Simply exiting the Service Mode will not make the changed settings take effect. You must turn the main power switch OFF
and then ON again.
5.1.3 Exiting procedure
1. Touch [Exit] on the Service Mode screen.
2. Turn OFF the main power switch. Wait 10 seconds, then turn ON the main power switch again.
5.2 Time Zone/Date & Time Input mode
5.2.1 Use
• This mode is used to set time-of-day and date.
• The set time zone/date & time are automatically reflected in the date and time setting of Administrator Settings.
Time Zone Setting Set the time zone applicable to the area.
After the setting, touch [Entry] and then [Apply] to validate the time.
The following lists settings of time zones of different areas.
-08:00: U.S.: Pacific Standard Time
-06:00: U.S.: Central Standard Time
-05:00: U.S.: Eastern Standard Time
I ADJUSTMENT/SETTING > 5. SERVICE MODE
I-91