Konica Minolta bizhub C658 Service Manual page 560

bizhub C658/C558/C458/C368/C308/C258
[3] [1]
[1]
[1]
[2] [1]
5. To reinstall, reverse the order of removal.
8.8.10 Vertical transport motor (M132) (PC-415)
1. Remove the rear cover.
G.8.8.3 Rear cover (PC-415)
[3] [2] [4]
[1] [2]
[1]
[2] [1]
6. To reinstall, reverse the order of removal.
8.8.11 Elevator motor (M134) (PC-415)
1. Slide out the paper feed tray.
2. Remove the rear cover.
G.8.8.3 Rear cover (PC-415)
2. Remove three screws [1].
[2]
3. Disconnect the connector [2], and remove the paper feed motor assy [3].
4. Remove three screws [1], and remove the paper feed motor [2].
2. Remove the harness from the wire saddle [1].
3. Remove three screws [2].
4. Disconnect the connector [3], and remove the vertical transport motor assy [4].
5. Remove three screws [1], and remove the vertical transport motor [2].
NOTE
▪ When mounting the paper feed motor assy, use care not to forget to
set the belt to the gear.
NOTE
▪ When mounting the vertical transport motor assy, use care not to
forget to set the belt to the gear.
G-260
G DISASSEMBLY/REASSEMBLY > 8. Option