Konica Minolta bizhub C658 Service Manual page 679

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1]
[2]
[1]
[1] [2]
[1] [2]
5. Rotate the stapler transfer dial [2] to move the stapler [1] towards the rear until
the dial stops.
NOTE
▪ If the stapler rotated (tilted) at the rear of the finisher, move it forward
until it becomes straight and again move it backward.
6. Disconnect two connectors [1] and remove the harness from the wire saddle
[2].
7. Disconnect three connectors [1] and remove the harness from four wire
saddles [2].
G-379
G DISASSEMBLY/REASSEMBLY > 8. Option