Konica Minolta bizhub C658 Service Manual page 820

bizhub C658/C558/C458/C368/C308/C258
Authentication Card ID
Number
Bio Beep Sound
Authenticati
on
Operation Settings
(b) Procedure
• Select either one of the authentication devices and press the corresponding key to go to the individual operation setting screen.
• The screen displays the authentication device that is selected in [Service Mode] -> [Billing Setting] -> [Authentication Device 2].
• If SSFC (Shared Security Formats Cooperation) is selected in Card Authentication, set [Company Code], [Company Identification
Code], [Area No.], [Building No.], [Floor No.], [Room No.], and [Security Level].
(c) Setting items for SSFC card information
• When using SSFC card, acquire the following information from the administrator and convert the value to input using the control panel.
Items of FeliCa SSFC detail setting
Room number
Floor number
Building number
Area number
Security level
Company identification code (CL code)
*1
Company code *2
*1: The character length of the company code is 10 bytes.
*2: Use alphabetical upper case/lower case characters and numeric characters for Company code. When the company code is not set, this
space will be left blank.
(2) Logoff Settings
(a) Use
• Select whether or not the user is logged off after a scan or fax is sent or after the copy document is scanned.
(b) Default setting
• Do not log off
(c) Setting item
• Do not log off
• Log off
2.11.2 Network Settings-Network Fax Settings
• It will not be displayed on the screen when all items are set to "OFF" in [Service Mode] -> [System 2] -> [Network Fax Settings].
(1) Network Fax Function Settings
(a) IP Address Fax Function
• Setting will be available when [IP Address Fax] is set to "ON" in [Service Mode] -> [System 2] -> [Network Fax Settings].
Use
• To set whether or not to use IP address fax function.
Default setting
• OFF
Setting item
• ON
• OFF
(b) Internet Fax Function
• Setting will be available when [Internet Fax] is set to "ON" in [Service Mode] -> [System 2] -> [Network Fax Settings].
Use
• To set whether or not to use Internet fax function.
Default setting
• OFF
• [Card Authentication]: Logs in simply by placing your IC card or NFC-compatible Android
device on the authentication unit.
• [Card Authentication + Password]: Logs in by placing the IC card or NFC-compatible
Android device on the authentication unit and entering the password.
[Card Authentication] is specified by default.
• Specify whether to notify the counter, which collects the use status of this machine, of the
authentication card ID.
• [Ignore] is specified by default.
• Set whether to give a "blip" sound when the finger vein pattern is scanned successfully.
• [ON] is specified by default.
Set how to log in to this machine.
• [1-to-many authentication]: A user simply needs to place his or her finger to log in.
• [1-to-1 authentication]: A user needs to enter the user name and place his or her finger to
log in.
[1-to-many authentication] is specified by default.
Information to be obtained from the administrator
Sample-data (decimal number)
37
15
50
85
2
06BGLQVX17 (ASCII code)
CompanyA (ASCII code)
I-50
I ADJUSTMENT/SETTING > 2. List of utility mode
Setting value (hexadecimal number)
00 25
00 0F
00 32
00 55
00 02
30 36 42 47 4C 51 56 58 31 37
CompanyA