Konica Minolta bizhub C658 Service Manual page 629

bizhub C658/C558/C458/C368/C308/C258
[1] [3]
[2]
7. To reinstall, reverse the order of removal.
8.15.8 Stopper drive motor (M4) (SD-511)
1. Remove the saddle unit.
G.8.14.10 Saddle unit (FS-534SD)
2. Remove the front cover.
G.8.15.1 Front cover (SD-511)
[1]
[1]
[2]
[1] [3]
6. To reinstall, reverse the order of removal.
8.15.9 Center fold roller motor (M5) (SD-511)
1. Remove the saddle unit.
G.8.14.10 Saddle unit (FS-534SD)
[2] [3]
[1]
4. To reinstall, reverse the order of removal.
8.15.10 Tri-folding guide motor (M6) (SD-511)
1. Remove the saddle unit.
G.8.14.10 Saddle unit (FS-534SD)
2. Remove the front cover.
G.8.15.1 Front cover (SD-511)
[2]
[2]
5. Disconnect the connector [1].
6. Remove two screws [2], and remove the alignment motor [3].
3. Remove six screws [1], and remove the plate [2].
4. Disconnect the connector [1].
5. Remove two screws [2], and remove the stopper drive motor [3].
2. Disconnect the connector [1].
3. Remove four screws [2], and remove the center fold roller motor [3].
G-329
G DISASSEMBLY/REASSEMBLY > 8. Option