Konica Minolta bizhub C658 Service Manual page 903

bizhub C658/C558/C458/C368/C308/C258
(10) Send-SMTP port number
(a) Use
• To set the SMTP port number for transmission used for the CS Remote Care.
(b) Default setting
• 25
(c) Setting range
• 1 to 65535
(11) Send-SMTP Connection Time-out
(a) Use
• To set the timeout period for transmission.
(b) Default setting
• 60 Sec
(c) Setting range
• 30 to 300 Sec
(12) Send-Authentication Setting
(a) Use
• To set whether or not to authenticate during transmission via SMTP server.
• To use when authenticating during transmission.
Available authentication mode: POP Before SMTP, SMTP authentication
(b) Default setting
• OFF
(c) Setting item
• OFF
• POP Before SMTP
• SMTP Authentication
NOTE
▪ Setting to "POP Before SMTP" will set the time for POP Before SMTP.
▪ Default setting: 60 Sec
▪ Setting range: 0 to "60 Sec"
• When setting to SMTP authentication, touch the "Setting Check" key for authentication.
User ID
Password
Domain name
(13) TX/RX Test
(a) Use
• To determine the correct transmission and reception using CS Remote Care.
(b) Procedure
1. Press the Start key to let the machine start the transmission and reception test.
2. The test procedure and result will be displayed on the screen.
(14) Data Initialization
(a) Use
• To initialize the contents for the sever setting.
(b) Default setting
• No
(c) Setting item
• Yes
• No
5.14.5 Maintenance/Default Settings - Server Setting (http1 or http2 is selected)
(1) HTTP Server Settings
(a) Use
• To set a http server at the other end that is used in CS Remote Care.
Enter the user ID for SMTP authentication.
Enter the password for SMTP authentication.
Enter the domain name for SMTP authentication.
I-133
I ADJUSTMENT/SETTING > 5. SERVICE MODE