Konica Minolta bizhub C658 Service Manual page 536

bizhub C658/C558/C458/C368/C308/C258
[1]
8.5.6 Tray 3 paper feed unit (PC-110/PC-210)
1. Remove the right door.
G.8.5.1 Right door (PC-110/PC-210)
2. Remove the rear right cover.
G.8.5.2 Rear right cover (PC-110/PC-210)
3. Slide out the tray 3.
[1] [3]
[2] [1] [4]
[2] [1]
[1]
8. To reinstall, reverse the order of removal.
8.5.7 Tray 4 paper feed unit (PC-210)
1. Remove the right door.
G.8.5.1 Right door (PC-110/PC-210)
2. Remove the rear right cover.
G.8.5.2 Rear right cover (PC-110/PC-210)
3. Slide out the tray 4.
[1] [3]
[2] [1]
10. Hold the transportation handles at the right and left of the main body, and lift
[2]
[4]
the main body [1] and then remove the paper feed cabinet [2].
NOTE
▪ When transporting or moving the main body, assign adequate
number of persons.
4. Remove three tabs [1], and remove the harness cover [2].
5. Remove the harness from two wire saddles [3].
6. Disconnect two connectors [4].
7. Remove three screws [1], and remove the tray 3 paper feed unit [2].
4. Remove three tabs [1], and remove the harness cover [2].
5. Remove the harness from the wire saddle [3].
6. Disconnect two connectors [4].
G-236
G DISASSEMBLY/REASSEMBLY > 8. Option