Konica Minolta bizhub C658 Service Manual page 846

bizhub C658/C558/C458/C368/C308/C258
Imaging Process Adjustment
Density Balance Adjust *1
Max Image Density Adj
Image Background Adj
Paper Separation Adjustment
Monochrome Density Adjustment
Removable Voltage Adjust
TCR Level Setting
Transfer Voltage Fine Adj
Charge AC Output fine adjustment
Thick Paper Density Adjustment
Grad/Dev AC Bias V Selection
Manual Toner Add
*1: It is not used on bizhub C368/C308/C258.
4.2.3 CS Remote Care
NOTE
▪ After exiting Service Mode, you must turn OFF the main power switch. Turning ON the main power switch again after waiting 10
seconds makes the changes to the Service Mode setting take effect.
Maintenance / Default Settings
Maintenance Start
Maintenance Complete
Server Settings
Detail Setting
Product Auth. Settings
Import/Export Settings
Auto initial dial setting
Stabilization Only
Copy
Printer
Primary transfer adj.
2nd Transfer Adj.
Manual Toner Add
Hopper Toner Filling
CS Remote Care
I-76
I ADJUSTMENT/SETTING > 4. LIST OF SERVICE MODE
Ref. Page
I.5.6.3 Density Balance Adjust (bizhub C658/C558/
C458)
I.5.6.4 Max Image Density Adj
I.5.6.5 Image Background Adj
I.5.6.6 Paper Separation Adjustment
I.5.6.7 Monochrome Density Adjustment
I.5.6.8 Removable Voltage Adjust
I.5.6.9 TCR Level Setting
I.5.6.10 Transfer Voltage Fine Adj
I.5.6.11 Charge AC Output fine adjustment
I.5.6.12 Thick Paper Density Adjustment
I.5.6.13 Grad/Dev AC Bias V Selection
I.5.6.14 Manual Toner Add
I.5.14.1 Maintenance/Default
Settings - System Selection
-
-
I.5.14.4 Maintenance/Default
Settings - Server Setting (E-Mail1
or E-mail2 is selected.)
I.5.14.5 Maintenance/Default
Settings - Server Setting (http1 or
http2 is selected)
I.5.14.3 Maintenance/Default
Settings - Detail Setting
I.5.14.6 Product Auth. Settings
I.5.14.7 Import/Export Settings
I.5.14.8 Auto Initial Dial Setting
Ref. Page