Konica Minolta bizhub C658 Service Manual page 440

bizhub C658/C558/C458/C368/C308/C258
[1]
[2] [1]
[1] [3]
[1] [2]
12. To reinstall, reverse the order of removal.
6.5.4 Switchback motor (M4)
1. Remove the fusing unit.
F.8.10.1 Replacing the fusing unit (bizhub C658/C558)
F.8.10.2 Replacing the fusing unit (bizhub C458)
2. Remove the control panel left cover.
G.6.2.6 Control panel left cover
3. Remove the control panel right cover.
G.6.2.7 Control panel right cover
4. Remove the control panel front cover.
G.6.2.9 Control panel front cover
5. Remove the upper right cover.
G.6.2.20 Upper right cover
6. Remove the paper exit unit.
G.6.3.19 Paper exit unit
[2]
[3]
9. To reinstall, reverse the order of removal.
6.5.5 ADU transport motor1 (M5)
1. Remove the ADU transport unit.
G.6.3.18 ADU transport unit
2. Remove the soaking roller pressure solenoid.
G.6.8.5 Soaking roller pressure solenoid (SD5) (bizhub C658/C558)
10. Remove the screw [1], and remove the harness guide [2].
11. Remove four screws [1]. Disconnect the connector [2], and remove the fusing
[1]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
9. Remove the harness from the harness guide [1].
motor [3].
7. Disconnect the connector [1].
8. Remove two screws [2], and remove the switchback motor [3].
G-140