Konica Minolta bizhub C658 Service Manual page 479

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
[2]
[1]
[1]
[1]
[1]
[1]
[1]
G DISASSEMBLY/REASSEMBLY > 7. Dual scan document feeder
5. Remove two screws [1], and remove the metal plate [2].
6. Remove the harness from the two wire saddles [1], and disconnect the
connector [2].
7. Disconnect three connectors [1].
8. Change the set position of the stopper [1] to the lower side.
NOTE
▪ After installing the dual scan document feeder, make sure to return
the stopper [1] of the hinge to the upper side.
9. Open the dual scan document feeder at 90 degrees.
10. Remove two screws [1].
G-179