Konica Minolta bizhub C658 Service Manual page 623

bizhub C658/C558/C458/C368/C308/C258
[3]
[2]
[1]
5. To reinstall, reverse the order of removal.
8.14.22 Paper receiving control motor (M12) (FS-534/FS-534SD)
1. Remove the finisher from the main body.
G.8.14.6 Finisher (FS-534/FS-534SD)
2. Remove the rear cover.
G.8.14.1 Rear cover (FS-534/FS-534SD)
3. When the saddle unit is attached, open the front door and pull out the saddle unit.
[1]
[1]
[1]
[2]
[2]
[1]
7. To reinstall, reverse the order of removal.
8.14.23 Side stapler movement motor (M13) (FS-534/FS-534SD)
1. Remove the finisher from the main body.
G.8.14.6 Finisher (FS-534/FS-534SD)
2. Remove the rear cover.
G.8.14.1 Rear cover (FS-534/FS-534SD)
3. When the saddle unit is attached, open the front door and pull out the saddle unit.
3. Disconnect the connector [1].
4. Remove two screws [2], and remove the main tray up/down motor [3].
4. Remove two screws [1].
5. Disconnect the connector [1], and remove the paper receiving control motor
assy [2].
6. Remove two screws [1], and remove the paper receiving control motor [2].
G-323
G DISASSEMBLY/REASSEMBLY > 8. Option