Konica Minolta bizhub C658 Service Manual page 642

bizhub C658/C558/C458/C368/C308/C258
[1]
[2] [1]
5. To reinstall, reverse the order of removal.
8.16.11 FNS entry transport motor (M2) (FS-536/FS-536SD)
1. Remove the finisher from the main body.
G.8.16.6 Finisher (FS-536/FS-536SD)
2. Remove the rear cover.
G.8.16.1 Rear cover (FS-536/FS-536SD)
[3] [1]
[2]
[2] [1]
6. To reinstall, reverse the order of removal.
8.16.12 FNS discharge motor (M3) (FS-536/FS-536SD)
1. Remove the finisher from the main body.
G.8.16.6 Finisher (FS-536/FS-536SD)
2. Remove the rear cover.
G.8.16.1 Rear cover (FS-536/FS-536SD)
[3] [4]
[2] [1]
3. Disconnect all connectors from the board.
4. Remove four screws [1], and remove the FS control board [2].
3. Disconnect the connector [1].
4. Remove two screws [2], and remove the FNS entry transport motor assy [3].
5. Remove two screws [1], and remove the FNS entry transport motor [2].
3. Remove the harness from the wire saddle [1], and disconnect the connector
[2].
4. Remove two screws [3], and remove the FNS discharge motor assy [4].
G-342
G DISASSEMBLY/REASSEMBLY > 8. Option