Konica Minolta bizhub C658 Service Manual page 657

bizhub C658/C558/C458/C368/C308/C258
[3] [2] [1]
[4] [3]
5. To reinstall, reverse the order of removal.
8.17.8 Alignment motor (M3) (FS-536SD saddle section)
1. Remove the saddle unit.
Saddle unit (FS-536SD)
2. Remove the front cover.
G.8.17.1 Front cover (FS-536SD saddle section)
[1]
[2]
[1]
[2] [1]
[1] [3]
[2]
7. To reinstall, reverse the order of removal.
8.17.9 Stopper drive motor (M4) (FS-536SD saddle section)
1. Remove the saddle unit.
Saddle unit (FS-536SD)
2. Remove the front cover.
G.8.17.1 Front cover (FS-536SD saddle section)
3. Remove the harness from the wire saddle [1], and disconnect the connector
[2].
4. Remove two screws [3], and remove the paper discharge control motor [4].
3. Remove four screws [1], and remove the plate [2].
4. Remove four screws [1], and remove the plate [2].
5. Disconnect the connector [1].
6. Remove two screws [2], and remove the alignment motor [3].
G-357
G DISASSEMBLY/REASSEMBLY > 8. Option