Konica Minolta bizhub C658 Service Manual page 571

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1] [2]
[2] [1]
[3]
(2) Mounting
[2]
[3]
[1]
[2]
[2]
[2]
[4]
[1]
[4]
18. Remove the E-ring [1] on the front side to remove the driving pulley [2].
19. Pull out the auxiliary wire [1] and two lift wires [2].
20. Remove three E-rings [1] and three wire pulleys [2] to remove the lift wire/S
[3] and the lift wire/L [4].
1. Insert the lift wire/L [2] to the left hole [1] on the rear face.
2. Set the lift wire/L [2] to the near side groove [1] of the wire pulley and fix it
with the wire holding jig [3] and the E-ring [4].
G-271
G DISASSEMBLY/REASSEMBLY > 8. Option