Konica Minolta bizhub C658 Service Manual page 437

bizhub C658/C558/C458/C368/C308/C258
[2] [1]
[2] [3] [1] [2]
11. To reinstall, reverse the order of removal.
6.4.18 Tray 1 FD paper size board (FDPSB/1), tray 2 FD paper size board (FDPSB/2)
NOTE
▪ The tray 1 FD paper size board and the tray 2 FD paper size board are of the same form and mechanism. This procedure shows
the steps taken for the tray 1 FD paper size board.
1. Remove the tray 1.
G.6.2.27 Tray 1
2. Remove the tray 2.
G.6.2.28 Tray 2
[2] [4]
[3]
[1] [2]
[1]
6. To reinstall, reverse the order of removal.
6.4.19 Tray 1 CD paper size board (CDPSB/1), tray 2 CD paper size board (CDPSB/2)
NOTE
▪ The tray 1 CD paper size board and the tray 2 CD paper size board are of the same form and mechanism. This procedure shows
the steps taken for the tray 1 CD paper size board.
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
2. Remove the toner filter.
F.8.1.1 Replacing the toner filter
3. Remove the lower rear cover.
G.6.2.21 Lower rear cover
4. Remove the protective shield.
G.6.2.26 Protective shield
5. Open the PWB box.
G.6.3.9 How to open the PWB box/1
6. Remove the high voltage unit.
G.6.4.11 High voltage unit (HV)
7. Slide out the tray 1.
[2]
[1]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
9. Disconnect three connectors [1].
10. Remove four screws [2], and remove the fusing power supply [3].
3. Disconnect the connector [1].
4. Remove the screw [2] and three tabs [3], and remove the tray 1 FD paper size
board assy [4].
5. Remove three tabs [1], and remove the Tray 1 FD paper size board [2].
G-137