Konica Minolta bizhub C658 Service Manual page 687

bizhub C658/C558/C458/C368/C308/C258
[2]
[3] [1]
[2] [1]
[1]
[1]
[3]
[1] [2]
8. Reinstall the above parts following the removal steps in reverse.
8.19.30 Stapler movement motor (M19) (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
[2]
[1] [3]
[2]
3. Disconnect the connector [1].
4. Remove three screws [2] and remove the sub tray discharge motor assy [3].
5. Remove four screws [1], and remove the plate [2].
6. Remove the E-ring [1].
7. Remove the gear [1] and pin [2], and remove the sub tray discharge motor [3].
2. Disconnect the connector [1].
3. Remove three screws [2] and remove the stapler movement motor assy [3].
G-387
G DISASSEMBLY/REASSEMBLY > 8. Option