Konica Minolta bizhub C658 Service Manual page 788

bizhub C658/C558/C458/C368/C308/C258
(a) Power Supply/Power Save Settings
Key name
Low Power Mode Settings The upper limit can be set up to 240 min. only when the switch number "157" is specified to "22" at HEX
Sleep Mode Settings
Power Key Setting
Power Save Settings
Enter Power Save Mode
Power Consumption in
Sleep Mode
Power Saving Fax/Scan
Awake from Power Save
Mode by Touching Control
Panel
(b) Output Settings
Key name
Print/Fax Output Settings
Output Tray Settings
Shift Output Each Job
• *1: bizhub C368/C308/C258 only
• *2: bizhub C658/C558/C458 only
• *3: Except for bizhub C658
(c) Date/Time Setting
Key name
Date/Time Setting
(d) Daylight Saving Time
Key name
Daylight Saving Time
(e) Weekly Timer Settings
NOTE
▪ It will not be displayed when [Service Mode] -> [Billing Setting] ->
mounted.
Key name
Weekly Timer ON/OFF
Settings
Time Settings
Date Settings
Select Time for Power
Save
Password for Non-
Business Hours
Tracking Function Settings -
Display ON/OFF Time
assignment by setting [Service Mode] -> [System 2] -> [Software Switch Setting].
• When [Service Mode] -> [System 1] ->
on and off displays and becomes selectable.
• The sleep mode will begin in 48 hours even if it sets it to "OFF."
• The upper limit can be set up to 240 min. only when the switch number "157" is specified to "22" at HEX
assignment by setting [Service Mode] -> [System 2] -> [Software Switch Setting].
• It will not be displayed when optional image controller IC-416 is mounted.
• In ErP auto power OFF mode, this machine cannot receive data or faxes, and also it cannot scan or print
an original.
-
-
It will not be displayed when optional image controller IC-416 is mounted.
This function is available when the option other than "Copy" is selected in [Administrator Settings] -> [System
Settings] -> [Reset Settings] -> [System Auto Reset] -> [Priority Mode].
-
Print -
Fax [Fax] will be displayed when optional fax kit FK-514 is mounted.
• It will be displayed when optional finisher FS-534 or FS-534SD is mounted. *1
• It will be displayed when optional finisher FS-536, FS-536SD, FS-537, or FS-537SD is mounted. *2
• It will be displayed when optional job separator JS-506 is mounted. *3
• It will be displayed when optional finisher FS-534 or FS-534SD is mounted. *1
• It will be displayed when optional finisher FS-536, FS-536SD, FS-537, or FS-537SD is mounted. *2
• It will be displayed when optional finisher FS-533 or job separator JS-506 is mounted. *3
When [Administrator Settings] -> [Network Settings] -> [Detail Settings] -> [Time Adjustment Setting] is set to
"ON", [Set Date] will be displayed. Touch [Set Date] and modify the time.
When setting to "Yes", set the time difference to move up.
• Default setting: 60 min.
• Setting range: 1 to 150
-
-
-
When "Yes" is selected, using the 10-key pad, input the Power Save Start Time and Power Save End Time.
When setting to "Yes", enter the password (eight digits).
-
I ADJUSTMENT/SETTING > 2. List of utility mode
Function/Precondition
[Sleep ON/OFF Choice
Function/Precondition
Function/Precondition
Function/Precondition
[Management Function
Function/Precondition
I-18
Setting] is allowed, the setting to turn sleep
Choice] shows that the vendor 2 is