Konica Minolta bizhub C658 Service Manual page 576

bizhub C658/C558/C458/C368/C308/C258
Rear side
[1] [2]
[2]
Front side
[2]
[1]
[2]
[1]
[2]
[1]
21. Wind the wire to the driving pulley [2] by rotating the lift up shaft [1]
(counterclockwise when seen from rear) until the tray assy has risen to the
upper end.
NOTE
▪ Wind the wire to the direction shown by the arrow.
22. Once the wire is wound until the tray assy is at the upper end, wind the
auxiliary wire [2] once in a clockwise direction to the wire pulley [1] in front.
23. Set the auxiliary wire [1] in the front to the hook of the slide spring [2].
24. Mount the wire holding jig [1] and secure it with the E-ring [2].
G-276
G DISASSEMBLY/REASSEMBLY > 8. Option