Konica Minolta bizhub C658 Service Manual page 408

bizhub C658/C558/C458/C368/C308/C258
[3]
[2] [1]
[4]
6.3.10 PWB box/2 (bizhub C658/C558)
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
2. Remove the toner filter.
F.8.1.1 Replacing the toner filter
3. Remove the lower rear cover.
G.6.2.21 Lower rear cover
4. Remove the scanner left cover.
G.6.2.4 Scanner left cover
5. Remove the scanner rear cover.
G.6.2.1 Scanner rear cover
6. Remove the DF cable cover.
G.6.2.22 DF cable cover
7. Remove the upper rear cover.
G.6.2.25 Upper rear cover
8. Remove the paper cooling fan assy.
G.6.7.7 Paper cooling fan (FM8)
[2] [1]
[1]
[1] [2] [3]
[4] [5]
[2]
[1]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
9. Remove the cable from three wire saddles [1].
10. Disconnect two connectors [2].
11. Remove the screw [3], and open the PWB box /1 [4].
9. Remove seven screws [1], and remove the IH power supply protective shield
[2].
10. Disconnect the connector [1], and remove the harness from the edge cover [2]
and two wire saddles [3].
11. Disconnect the connector [4], and remove the harness from the edge cover [5].
12. Disconnect the connector [1], and remove the harness from two wire saddles
[2].
G-108