Konica Minolta bizhub C658 Service Manual page 551

bizhub C658/C558/C458/C368/C308/C258
[1]
8.7.6 Paper feed unit (PC-410)
1. Remove the right door.
G.8.7.1 Right door (PC-410)
2. Remove the rear right cover.
G.8.7.2 Rear right cover (PC-410)
3. Slide out the paper feed tray.
[1] [3]
[2] [1] [4]
[2]
[1]
8. To reinstall, reverse the order of removal.
8.7.7 PC control board (PCCB) (PC-410)
1. Remove the rear cover.
G.8.7.3 Rear cover (PC-410)
[1]
[1]
4. To reinstall, reverse the order of removal.
8.7.8 Tray 3 paper empty indicator board (PEIB/3) (PC-410)
1. Slide out the paper feed tray.
[2]
[1]
[2]
10. Hold the transportation handles at the right and left of the main body, and lift
the main body [1] and then remove the paper feed cabinet [2].
NOTE
▪ When transporting or moving the main body, assign adequate
number of persons.
4. Remove three tabs [1], and remove the harness cover [2].
5. Remove the harness from two wire saddles [3].
6. Disconnect two connectors [4].
7. Remove three screws [1], and remove the paper feed unit [2].
2. Disconnect all connectors on the PC control board.
3. Remove four screws [1], and remove the PC control board [2].
G-251
G DISASSEMBLY/REASSEMBLY > 8. Option