Konica Minolta bizhub C658 Service Manual page 674

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
6. Reinstall the above parts following the removal steps in reverse.
8.19.19 Main tray up/down motor (M6) (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
[1]
[2] [1]
[2] [1]
[2] [3]
6. Reinstall the above parts following the removal steps in reverse.
8.19.20 Paddle up/down motor (M7) / Arm drive motor (M8) / FNS paddle motor (M9) (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
2. Remove the upper cover/1.
G.8.19.1 Upper cover/1 (FS-537/FS-537SD)
3. Remove the upper cover/2.
G.8.19.2 Upper cover/2 (FS-537/FS-537SD)
4. Remove the upper cover/3.
G.8.19.3 Upper cover/3 (FS-537/FS-537SD)
5. Remove the front upper cover.
G.8.19.6 Front upper cover (FS-537/FS-537SD)
6. Remove the sub tray (paper exit upper tray).
G.8.19.9 Sub tray (Paper exit upper tray) (FS-537/FS-537SD)
[2]
5. Remove two screws [1] and remove the route change gate motor [2].
2. When the saddle unit is attached, open the front door and pull out the saddle
unit.
3. Remove two screws [1] and remove the metal plate [2].
4. Disconnect the connector [1].
5. Remove four screws [2] and remove the main tray up/down motor [3].
G-374
G DISASSEMBLY/REASSEMBLY > 8. Option