Konica Minolta bizhub C658 Service Manual page 285

bizhub C658/C558/C458/C368/C308/C258
[4]
[2] [3] [5]
13. To reinstall, reverse the order of removal.
20.1.8 Replacing the lower paddle (FS-537SD)
(1) Periodically replacing parts/cycle
• Lower paddle: Every 2,000,000 counts
(2) Procedure
[1]
20.2 Sensor section
20.2.1 FNS entrance sensor (PS34) (FS-537SD/FS-537)
(1) Periodically cleaning parts/cycle
• FNS entrance sensor (PS34): Every 300,000 printouts
(2) Procedure
1. Remove the finisher from the main body.
Finisher (FS-537/FS-537SD)
[1]
[2]
[1]
F PERIODICAL MAINTENANCE > 20. Periodical maintenance procedure FS-537/
9. Remove the bushing [1].
[1]
10. Remove the E-ring [2], and remove the bushing [3].
11. Remove two E-rings [4].
12. Replace the upper paddle [5].
1. Remove the lower paddle [1].
2. Remove two screws [1], and remove the cover [2].
3. Remove the screw [1].
F-97
FS-537SD