Konica Minolta bizhub C658 Service Manual page 329

bizhub C658/C558/C458/C368/C308/C258
[2] [1]
[1]
[1] [2]
[1]
[2] [3]
[2] [3]
[1]
10. To reinstall, reverse the order of removal.
11. Select [Service Mode] -> [State Confirmation] -> [Memory/Storage Adjustment] -> [Format], and conduct the HDD format function.
12. [Service Mode] -> [State Confirmation] -> [Memory/Storage Adjustment] ->
5.3.10 How to open the PWB box
1. Remove the lower rear cover.
G.5.2.20 Lower rear cover
[2]
[1]
[1]
[3] [2]
[1]
[2]
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
6. Remove three screws [1], and remove the cover [2].
7. Remove four screws [1].
8. Remove the plate spring [2], and remove the plate [3].
9. Remove four metal plates [2] and two connectors [3] from the hard disk [1].
[Storage R/W
2. Remove the screw [1], and remove the connector cover [2].
3. Disconnect two connectors [1] from the PWB box side panel.
4. Remove the screw [2], and remove the connector cover [3].
G-29
Check]