Konica Minolta bizhub C658 Service Manual page 594

bizhub C658/C558/C458/C368/C308/C258
8.12 Disassembly/reassembly procedure (FS-533)
8.12.1 Front cover (FS-533)
[3]
[2]
[1]
4. To reinstall, reverse the order of removal.
8.12.2 Upper cover (FS-533)
1. Remove the front cover.
G.8.12.1 Front cover (FS-533)
2. Remove the rear cover.
G.8.12.3 Rear cover (FS-533)
[2] [1]
4. To reinstall, reverse the order of removal.
[2]
[1]
[1]
[3]
[1]
1. Remove two screws [1] and remove the antistatic brush [2].
NOTE
▪ Make sure not to deform the brush by touching it.
▪ Make sure not to touch the upper surface of the transport unit [3] as
it damages the guide plates.
2. Remove four screws [1] and two tabs [2], and remove the front cover [3].
3. NOTE
▪ When the punch kit (PK-519) is installed, the cover [1] should be
removed.
3. Remove the screw [1], and remove the cover [2].
G-294
G DISASSEMBLY/REASSEMBLY > 8. Option