Konica Minolta bizhub C658 Service Manual page 586

bizhub C658/C558/C458/C368/C308/C258
[3]
[2]
[1]
[1]
[1] [2]
[3]
[2]
[1]
[1][2]
[5]
[4]
4. Set the lift wire/L [2] to the near side groove [1] on the wire pulley, and set
the lift wire/S [4] to the far side groove [3] and secure them with the E-ring
[5].
5. NOTE
▪ They are properly fixed if both edges of the wire [1] are at the same
position.
6. Take the edges of the lift wire/S [1] and the lift wire/L [2] and set them to the
holes on the shaft [3].
7. Take the edge of the lift wire/L [1] and set it to the hole on the shaft [2].
8. Mount the driving pulley [1] and secure it with the E-ring [2].
G-286
G DISASSEMBLY/REASSEMBLY > 8. Option