Konica Minolta bizhub C658 Service Manual page 832

bizhub C658/C558/C458/C368/C308/C258
Function Name
Counter Remote Control To select whether or not to
URL Home Settings
Simple Auth.
(Authentication Setting)
User Box Administrator
Setting
SSL
SSL Encryption Strength To set the SSL encryption
Automatically Obtain
Certificates of S/MIME
S/MIME Encryption
Method
FTP Server
Server Capacity
Reduction Send Method
SNMPv1/v2c
SNMP v3 Security Level
and auth/priv-password
Print Data Capture
Network Setting Clear
Release Time Settings
Destination Registration
Change by User
(Address Book and
Program destination)
Secure Print User Box
Preview
Initialize (Network
Settings)
Image Log Transfer
Settings
Machine Update Settings To set firmware upgrading by
operation Ban release
time (CE Authentication)
E-mail RX Print
allow the Center to acquire
counter information managed
by the machine when CS
Remote Care is used.
To set whether to enable the
Scan to URL function.
You can print from the printer
driver using authentication that
requires only your user name
(without password).
To set whether to allow or
restrict the Box Administrator
to use the system.
To set whether to encrypt
access by SSL.
strength for the SSL encryption
communication.
-
-
To set whether to use FTP
server or not.
Select the sending method to
reduce the load of the E-mail
server (SMTP).
To use when changing Write
setting.
To set the security level for the
Reading/Writing Authority User
which is used for SNMP v3.
To set whether to allow or
restrict capturing the Print Job
Data.
To clear the network setting
through PageScope Web
Connection.
To set the period of time to be
elapsed before the access lock
state is released.
-
-
To clear the network related
settings.
Specifies whether to transfer
the input or output image data
to the server using whenever
machine inputs or outputs
image data.
Internet ISW, and enable or
disable various settings.
To set the period of time to be
elapsed before the access lock
state is released in CE
password authentication.
To print an E-mail attachment,
send an E-mail to the E-mail
address of this machine.
I ADJUSTMENT/SETTING > 2. List of utility mode
Default Setting When Enhanced Security mode is set to [ON]
Restrict Restrict (not to be changed)
Enable Disable (not to be changed)
Restrict Restrict (not to be changed)
Restrict Restrict (not to be changed)
OFF ON (not to be changed)
AES-256, AES/3DES (not to be changed to one containing
3DES-168, strength lower than AES/3DES)
RC4-128
No No (not to be changed)
3DES 3DES (not to be changed to DES or RC-2)
ON OFF (not to be changed)
OFF When [Stop URL when max. limit is exceeded] or
[Always Send via URL] is selected, this option is set
to [OFF].
Read/Write enable Only Read is enabled (not to be changed)
auth/priv- • The security level can be selected from among
password [auth-password] and [auth/priv-password].
• An 8-digit-or-more auth-password and priv-
password can both be set.
Allow Restrict (not to be changed)
Enabled Restrict
5 min. The setting value should be 5 min. or more (no
value less than 5 can be set)
Allow Restrict (not to be changed)
Thumbnail View, Only Detail View is enabled before password
Detail View, and authentication (Mode 2)
Document Details
are enabled
Enabled Restrict (not to be changed)
OFF OFF (not to be changed)
No No (not to be changed)
5 min. The setting value should be 5 min. or more (no
value less than 5 can be set)
OFF OFF (not to be changed)
I-62