Konica Minolta bizhub C658 Service Manual page 939

bizhub C658/C558/C458/C368/C308/C258
Fax-related counter
Counter by finishing option
Stabilization counter
PJ counter
5.17.9 Service Call History (Data)
(1) Use
• To display the trouble history in chronological order.
5.17.10 ADF Paper Pages
(1) Use
• To display the No. of sheets and mixed originals fed to the automatic document feeder.
5.17.11 Paper Jam History
(1) Use
• To display the jam history in chronological order.
NOTE
▪ [Code] displayed on the screen of JAM history indicates JAM code.
For details of JAM code, see "List of the JAM code."
5.17.12 Fax Connection Error
(1) Use
• To display the No. of fax transmission errors occurred.
5.17.13 ADF Scan Glass Contamin. Counter
(1) Use
• To display the average number of detected stain on the DF original glass (front side)/CIS glass (back side) at the pre-detection.
• Detection of CIS glass (back side) is available only when dual scan document feeder is mounted.
Pre-detection small size (Front Side)
Pre-detection small size (Back Side)
Cleaning brush rotation count (Front
Side)
Cleaning brush rotation count (Back
Side)
(2) Procedure
• To clear each counter value, select the items to be cleared, and touch Clear.
5.17.14 Parts Counter (Fixed)
• It will be displayed only when the optional finisher is mounted.
(1) Use
• When the optional finisher is mounted, the parts counter screen displays the relevant parts and their counts.
• When the relevant parts are replaced, their counters need to be reset to update the service history.
• Service history can be maintained from this menu.
NOTE
▪ See the table below for the relevant parts and count method.
(2) Procedure
1. Touch in the order of [Service Mode] -> [Counter] -> [↑] -> [Parts Counter (Fixed)].
2. Check the parts counter or display the relevant part of which counter will be reset.
3. Check the part count. To reset the count value, touch the key of the part where the counter is reset. Touch the Clear key.
(3) Fixed parts to be counted
No. CSRC Parts name
parameter
001 22 FNS 2-Staple Stapler
002 23 FNS Center Staple &
Fold Stapler
Displays individual counts in fax mode.
Displays individual counts on a finishing option basis.
Displays individual counts on a basis of the factors that cause image stabilization.
The counter helps to understand what causes image stabilization and how to
improve image stabilization control.
Job modes of jobs processed by the main unit are classified and labeled using
count values 1P/J, 2P/J, ..., 10P/J, 11P/J, and so on.
The counter is used to understand how the machine has been used in the field.
Small-sized detected stain divided by the number of times pre-detection is practiced (average
number of detected lines) will be displayed.
Small-sized detected stain divided by the number of times pre-detection is practiced (average
number of detected lines) will be displayed.
Total rotation count is displayed by counting 1 per one rotation of cleaning brush.
Total rotation count is displayed by counting 1 per one rotation of cleaning brush.
Parts number Limit value
PJ085601 300,000
A10D9293 200,000
I-169
I ADJUSTMENT/SETTING > 5. SERVICE MODE
Count condition
-
1 count for each sheet ejection in both 1
staple and 2 staple mode.
FS-534 / FS-533
FS-534S
D
- -
-
○