Konica Minolta bizhub C658 Service Manual page 602

bizhub C658/C558/C458/C368/C308/C258
[2]
[3] [1]
7. To reinstall, reverse the order of removal.
8.12.15 Tray lift up motor (M109) (FS-533)
1. Remove the rear cover.
G.8.12.3 Rear cover (FS-533)
[2] [3]
[1]
[2]
[1]
[1]
[1]
[2]
7. To reinstall, reverse the order of removal.
[1]
[2]
[2]
5. Remove two screws [1], and remove the stapler movement motor [2].
6. Disconnect the connector [3].
2. Disconnect the connector [1].
3. Remove the harness tie [2] and harness from the harness guide [3].
4. Remove the screw [1], and remove the finisher's cable [2].
5. Remove two screws [1], and remove the harness guide [2].
6. Remove two screws [2], and remove the tray lift up motor [1].
G-302
G DISASSEMBLY/REASSEMBLY > 8. Option