Konica Minolta bizhub C658 Service Manual page 600

bizhub C658/C558/C458/C368/C308/C258
6. To reinstall, reverse the order of removal.
8.12.11 Alignment roller motor (M103) (FS-533)
1. Remove the front cover.
G.8.12.1 Front cover (FS-533)
[2] [1] [3] [2]
4. To reinstall, reverse the order of removal.
8.12.12 Exit roller lift up motor (M104) (FS-533)
1. Remove the front cover.
G.8.12.1 Front cover (FS-533)
[4] [3]
[2] [3]
[2]
[1]
6. To reinstall, reverse the order of removal.
8.12.13 Alignment motor/F (M105), Alignment motor/R (M106) (FS-533)
1. Remove the paper exit tray unit.
G.8.12.6 Paper exit tray unit (FS-533)
[2]
[1]
[1]
2. Disconnect the connector [1].
3. Remove two screws [2], and remove the alignment roller motor [3].
2. Disconnect the connector [1].
3. Remove the spring [2].
4. Remove two screws [3], and remove the exit roller lift up motor assy [4].
5. Remove two screws [1], and remove the exit roller lift up motor [2].
2. Remove two screws [1], and remove the plate [2].
G-300
G DISASSEMBLY/REASSEMBLY > 8. Option