Konica Minolta bizhub C658 Service Manual page 856

bizhub C658/C558/C458/C368/C308/C258
NOTE
▪ After exiting Service Mode, you must turn OFF the main power switch. Turning ON the main power switch again after waiting 10
seconds makes the changes to the Service Mode setting take effect.
Line 1 *1
Line 2 *2
Line 3 *3
Line 4 *4
*1: It will be displayed only when [Service Mode] -> [System 2] ->
*2: It will be displayed only when [Service Mode] -> [System 2] ->
*3: It will be displayed only when [Service Mode] -> [System 2] ->
*4: It will be displayed only when [Service Mode] -> [System 2] ->
FAX
Modem/NCU *1
Network *1
System *1
Fax File Format *1
Communication *1
List Output *1
Function Parameter *1
Initialization *1
FAX Line Std. Setting
Modem/NCU *2 *3 *4
Network *2 *3 *4
Communication *2 *3 *4
Initialization *2 *3 *4
FAX Line Std. Setting
[Option Board
[Option Board
[Option Board
[Option Board
I-86
I ADJUSTMENT/SETTING > 4. LIST OF SERVICE MODE
I.5.22.1 Modem/NCU
I.5.22.2 Network
I.5.22.3 System
I.5.22.4 Fax File Format
I.5.22.5 Communication
I.5.22.6 List Output
I.5.22.7 Function Parameter
I.5.22.8 Initialization
I.5.22.9 FAX Line Std. Setting
I.5.23.1 Modem/NCU
I.5.23.2 Network
I.5.23.3 Communication
I.5.23.4 Initialize
I.5.23.5 FAX Line Std. Setting
Status] shows that FAX (circuit 1) is set to "Set".
Status] shows that FAX (circuit 2) is set to "Set".
Status] shows that FAX (circuit 3) is set to "Set".
Status] shows that FAX (circuit 4) is set to "Set".
Ref. Page