Konica Minolta bizhub C658 Service Manual page 548

bizhub C658/C558/C458/C368/C308/C258
8.6.14 Tray 3 vertical transport motor (M112), tray 4 vertical transport motor (M122) (PC-115/PC-215)
NOTE
▪ The tray 3 vertical transport motor and the tray 4 vertical transport motor are of the same form and mechanism. This procedure
shows the steps taken for the tray 3 vertical transport motor.
1. Remove the rear cover.
G.8.6.3 Rear cover (PC-115/PC-215)
[2] [1] [3]
[1]
[1]
[2] [1]
5. To reinstall, reverse the order of removal.
8.6.15 Tray 3 lift-up motor (M113), tray 4 lift-up motor (M123) (PC-115/PC-215)
NOTE
▪ The tray 3 lift-up motor and the tray 4 lift-up motor are of the same form and mechanism. This procedure shows the steps taken
for the tray 3 lift-up motor.
1. Remove the rear cover.
G.8.6.3 Rear cover (PC-115/PC-215)
[3] [2] [1]
[2]
4. To reinstall, reverse the order of removal.
8.7 Disassembly/reassembly procedure (PC-410)
8.7.1 Right door (PC-410)
1. Open the right door.
3. To reinstall, reverse the order of removal.
[1]
[2]
2. Remove three screws [1].
3. Disconnect the connector [2], and remove the tray 3 vertical transport motor
assy [3].
NOTE
▪ When mounting the tray 3 vertical transport motor assy, use care not
to forget to set the belt to the gear.
4. Remove three screws [1], and remove the tray 3 vertical transport motor [2].
2. Disconnect the connector [1].
3. Remove three screws [2], and remove the tray 3 lift-up motor [3].
2. Remove the screw [1], and remove the right door [2].
G-248
G DISASSEMBLY/REASSEMBLY > 8. Option