Konica Minolta bizhub C658 Service Manual page 864

Hide thumbs Also See for bizhub C658:

Table of Contents

bizhub C658/C558/C458/C368/C308/C258

7. Using the [+] / [-] key, change the setting value as necessary.

• If the cross deviates in the direction of A, increase the setting. (Decrease paper transport speed.)

• If the cross deviates in the direction of B, decrease the setting. (Increase paper transport speed.)

8. Produce another test pattern and make sure that there is no deviation.

Check Procedure

If the cross deviates in the direction of A,

decrease the setting.

If the cross deviates in the direction of B,

increase the setting.

Direction of A

5.4.2 Fusing Temperature

• To adjust individually the temperature of the heating roller for each type of paper, thereby coping with varying fusing performance under

changing environmental conditions.

• When fusing performance is poor, or wax streak or offset occurs when the type of paper is changed or environmental conditions change.

• Use when the curling of the paper due to the paper type or environmental change occurred, or when the paper jam, as well as stapling or

folding position error occurred due to the curling of the paper.

• By setting the temperature higher (+), gloss of print can be improved.

• By setting the temperature lower (-), exit roller mark can be reduced.

(2) Default setting

(3) Adjustment range

• bizhub C368/C308/C258

• bizhub C658/C558/C458 (600dpi/1200dpi)

Direction of B

Setting range

-20 °C to +10 °C

-10 °C to +20 °C

-20 °C to +10 °C

Setting range

-20 °C to +10 °C

I ADJUSTMENT/SETTING > 5. SERVICE MODE

Show Quick Links

Table of Contents