Konica Minolta bizhub C658 Service Manual page 669

bizhub C658/C558/C458/C368/C308/C258
[1]
6. To reinstall, reverse the order of removal.
8.19.13 Relay unit (FS-537/FS-537SD)
1. Remove the finisher from the main body.
G.8.19.12 Finisher (FS-537/FS-537SD)
[1]
3. To reinstall, reverse the order of removal.
8.19.14 Sensor unit (FS-537/FS-537SD)
1. Remove the RU transport unit.
G.8.19.13 Relay unit (FS-537/FS-537SD)
[1]
[2] [1]
[5] [2]
[4]
6. To reinstall, reverse the order of removal.
8.19.15 Stapler unit (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
2. Remove the front door.
G.8.19.5 Front door (FS-537/FS-537SD)
3. Remove the front lower cover.
G.8.19.7 Front lower cover (FS-537/FS-537SD)
[2]
[2]
[1]
[3]
5. Remove the connector [1] and remove the finisher [2] from the main body.
2. Remove two screws [1], and remove the RU transport unit [2].
2. Remove two screws [1], and remove the control panel left cover/1 [2].
3. Remove the harness from the wire saddle [1] and the edge cover [2].
4. Disconnect the connector [3].
5. Remove the screw [4], and remove the sensor unit [5].
G-369
G DISASSEMBLY/REASSEMBLY > 8. Option